 |
|
|
|
|
|
|
Designed to switch 2 pairs of stereo loudspeakers. Loudspeakers connected in series when in "1+2" mode. Ideal for Kitchen or "Auxiliary" loudspeakers.
Listen to either pair of loudspeakers separately or together.
Simple strong connection by push terminal.
Accepts loudspeaker cable up to 2.5mm (79/0.2mm) diameter.
Suitable for loudspeakers from 4 ohms to 16 ohms.
150 watts RMS per channel rating.
Strong, stylish metal console.
BT13: 4-Way Loudspeaker Control
Controls up to 4 pairs of stereo loudspeakers. The BT13 will automatically select the most appropriate series or parallel configuration to suit the number of loudspeakers selected,ensuring a safe load impedance for the amplifier at all times.
Any combination of loudspeakers swithchable.
Simple strong connection by screw terminals.
Accepts loudspeaker cable up to 2.5mm (79/0.2mm) diameter.
Suitable for loudspeakers of 8 ohms and above.
200 watts RMS per channel power rating.
Strong, stylish metal console.
BT913: 4-Way Hi-Fi Loudspeaker Control (With Headphone Socket)
Controls
up to 4 pairs of loudspeakers with one amplifier. Same circuit as BT13 but
provided with a headphone socket for monitoring. (Use of the headphone
socket does not mute other loudspeakers). Gold plated 4mm sockets
provided, suitable for either banana plugs or bare ended Hi-Fi loudspeaker
cable.
Use 4 pairs of loudspeakers on one amplifier.
200 watts per channel power rating.
Headphone socket with amplifier protection.
Accepts loudspeaker cable up to 6mm diameter.
Strong stylish slim-line metal cabinet.
BT934: Stereo Loudspeaker Volume Control
Local volume control of remote loudspeakers.
Transformer design for maximum efficiency.
High power rating - 60 watts.
Accepts loudspeaker cable up to 2.5mm (79/0.2mm) diameter.
Suitable for loudspeakers, 4, 6, or 8 ohms.
Frequency response 20 - 20,000Hz.
BT943: 4-Way View/Record S-Video Switcher
This control is designed for equipment using Phono (RCA) and S-Video connectors. It allows the selection of any of the four inputs, directing the signal to either of two independent outlets to view or record.
S-Video on all input/ouput.
Include 4 selectable inputs together with 2 independent selectable outputs.
Super easy connections, simple push botton operation.
Record one source while viewing another.
Housed in an attractive silver metal casing.
Gold plated Phono (RCA) and S-Video connectors.
BT26: Phono / Microphone Pre-Amplifier
A low noise high gain pre-amplifier for use with Magnetic Cartridges or Dynamic/Condenser microphones. Use on any amplifier with a "Phono" input.
IC technology for high gain and low noise.
CE certified.
Suitable for stereo microphones or up to 2 mono microphones.
Strong, stylish steel case.
Power supply included.
BT25: 3-Way Audio-Video Input Control
Use as a TV/VCR input control or Video Editor.
Enables 3 Audio-video devices to be switched into 1 TV and/or VCR.
Parallel output sockets for a second TV/VCR/DVD or sound output to Hi-Fi system.
Alternative use as a 3 input Video Editor.
Use with VCRs, DVDs, Camcorders, Satellite, TV, CD, Hi-Fi etc.
Gold plated Phone (RCA) sockets for minimum loss.
Neat, user friendly design.
